Yo ! Turkeys ! and other images of spring

We had these daffodils on the kitchen island a week ago and they gave me the feeling that the weather was about to break ... And it did. We still have snow on the ground but this weekend was 100% sunny and warm. I think I saw 50 degrees on my car thermometer for a minute .. Anychoice, it was beautiful and I was lucky to catch some turkeys prowling through the woods a few minutes before I found my first pussywillows ...
Click the pictures to enlarge them
Mr. Turkey above, and his ladies below ... He had a nice beard but hes turned just enough that you cant see it in this picture ...
I think there were 3 or 4 more ladies I cropped out ..
Pussywillows on the porch and Cactus Man Goes to the Pyramids by Jim Parsons, the guy Jim you see working in the shop photos ...
Sunset yesterday ... two months to leaves ...

Read More..

TURKEYS !!

Update 1/30/11 ... The turkeys come back from time to time ... I was watching them Sunday morning through my camera lens when i accidentally bumped the door glass ... Theyre off !! Its amazing house fast they can get airborne ..... theres a short, strutting male you tube video here.
Well, we just had some turkeys at the feeder ... Maybe 20 or so ... And we thought we were going through the birdseed last week ... Click the pictures to enlarge them ..
This is the Danger Will Robinson photo ... I think they saw me move to a different window inside the house. They didnt spook though and eventually they ambled off with probably a couple pounds of seed ...

Read More..

A collection of shop photos

I realized recently that I have never done a post of just shop photos, where you can see the layout of the various work spaces throughout the buildings on the property. We have been working on it all since 1998 and its grown over time to accommodate a lot of flexible spaces. There is also a stand up attic over the shop that accommodates lumber and veneer up to 12 long and a concrete floor crawlspace with wheelchairs for mobility, where the boiler, air compressor and additional lumber, pattern and jig storage live. Stuff expands to fill it all of course, and we dream about a better/bigger metal shop, but not this week for sure ... maybe sometime though ... Click the photos to enlarge them and enjoy your tour ...
Summer view
Winter view with the finish room on the right
Side porch with a Safety Speed Cut panel saw, lumber and ply storage shed with the blower at the far end, and a separate, free standing shed for sawdust ...
Summer porch use ...typically on Friday afternoons
The interior of the 16 x 22 finish room ... the tv cabinets (scroll down on that post) are still lurking under the big green drop cloth
standing on a stool, looking from east to west ... note dueling table saws with foot operated off switches, nested placement of jointer and planer, and dust collection under the strip oak, radiant heated floor.
looking from east to south showing the sanders (on wheels and the 16 of counters and drawers at workspace one.
radial and chop saw for rough and finish cuts on the same fence system
looking toward workspace #4, on wheels, 42 x 60 with the lathe tools on the back side, and at the outfeed of the sander with a light for defect spotting. The gray table in the foreground has a removable top over a router table on wheels.
workspace two, also on wheels, (behind the headboard), 43 x 84, with a pattern vise, sink and additional 8 bench with a vise.
workspace #1, 44 x 96 x 30 high with power on the four corners, also on wheels. Actually, everything that can be is on wheels.
workspace #3, where I work when Im in the shop.
The cnc upstairs ... best place to see what we do with this is at this link here ... And, if youre wondering how we got all 1400 pounds and 11 feet of it to the second floor here are some photos of that operation .... unbelievable in hindsight ....
workspace upstairs with mortiser, drill press, sander and bandsaw, adjacent to the cnc so Trevor can do two jobs at once.
library in a small hallchoice between the cnc and the office
my main workspace with computer, phone, fax, scanner, printer and music
southeast end of the office with another computer for Will or Sam to do their CAD drawings and email
a small collection of models in the bathroom
my board of finish samples and hardware for clients when they come ..this photo also works as an email to clients out of the area ...
looking out the office window and door to the pond
with the ducks recently back in town....
The metal shop is at the house, attached to the end of the garage ... More photos here
Looking into the shop with the double doors open ..
I hope to soon add plan view drawings of the shop for my own records but Ill have to do them first ... The woodshop was planned as a workshop, but built as a 3 bedroom two bath house where we lived for two years while we were waiting to sell our former house in Arlington ... I have some good pictures of the shop as a house that Ill post later too ... All for now ... If you made it all the choice to here, you might also enjoy these photos HERE showing how we got our 1400 pound cnc machine installed on the second floor. (Through the second story window)

Read More..

2nd Floor CNC

First time visitors to the second floor of my shop often ask How did you get that thing up here? Invariably, I cant find the book with the pictures from the installation so Im putting them here so I can find them ... Open Studio is coming in May and I know Ill need them then ... Click the photos to enlarge them ... About 25 more shop photos in the post below.
The completed installation.
Beginning of the installation process .. Thats Jim with one of his favorite weapons.
Ready to go .. +/- 2;30 in the afternoon.
The next morning ... Noel Dydo, my main excavating man at the wheel. It was a borrowed Lull and his last comment before he got on board was I havent ever driven one this old before . Comforting.
Anychoice ... In it went at about 11:00.
Buttoned back up by the end of the day ... That was five years ago in November and I think my last payment will be in July ... Mortgage burning party coming up .... To see what we do with this tool, check the category to the right called Trevors CNC Projects ... Its amazing. We do custom cnc work for other furniture makers both locally and not so locally ...

Read More..

Bed Update

3/28/10 ... Ok Home Stretch .... The woodworking part of the bed is pretty much complete and the first coat of stain is already on all the bed parts except the headboard, where we still have to do the inlays this week. They are going to be fun .... Click the pictures to enlarge them.
headboard assembled, ready for the inlay strip and inlays
This is the first sample inlay for one of the pair of center ducks. We did it in aluminum as a test, but the real inlays will be steel copper and brass ,,, all colored slightly with different patina solutions ... like a coloring, sort of ...
The nearly completed CAD drawing
3/16/2010 OK ... were making progress on the bed ... Will has finished carving the spiral posts and the walnut pine cones and is about to mortise the headboard posts to receive the headboard ... Below, Will and Jim are checking the pattern to be sure everythings the right size now that weve got it together for the first time. Happily, it all seems to line up ... Tomorrow, we mortise and cut the real headboard to shape for the final fitting before the inlays ....

Bolted up for the first time .... Click the pictures to enlarge them ,,,

Close up of the post top and one of the walnut pine cones

A sample center inlay Trevor cut today ... The ones in the bed will be made from brass, (beaks and feet), copper (reddish color details) and steel, blued, blackened and polished for grays ... Its going to be really interesting when we get to that ....
Some really fine curly maple for the headboard from our friends at Irion ... Totally white, totally nice and totally consistent figure across all the boards ...

Read More..

Merry Christmas !!

Merry Christmas Everyone ..... I was sort of stumped as to what to say and put up here until I noticed the framed card above hanging in our bedroom ... Its a card Sam drew when he was (we cant remember exactly), 3 or 4 years old ... We remember watching him do it though ... He started with the four red foot dots, then drew the reindeer, and then switched back to the red for the nose ... Rudolph ...
Well, a lot has happened in the last 24 or so years and I thank all of you .... readers, friends, and clients ... for your support and enthusiasm for our work over the years. Kit and I and Sam and Will wish you and your families a Happy Holiday Season and a Healthy and Prosperous New Year ...
And Mr. Barred Owl came by the shop yesterday and today to say Merry, Merry too ....

Read More..